LMR-1700

The LMR 1700 Cable is one of the many low-loss coaxial cables we carry at Allied Wire and Cable. This cable features a bare copper tube for its inner conductor and aluminum tape for its outer conductor, which enables the tightest bend radius of any cable of similar size and performance. It also features a foam PE dielectric and a tinned copper braid. This cable exhibits the lowest loss of any flexible cable and has a maximum temperature of 85°C. The LMR 1700 cable is designed for outdoor exposure, is UV resistant, and has a life expectancy of over 20 years.

4 items

  • EZ-1700-716FC
    EZ-1700-716FC
    EZ-1700-716FC
    $0.00 /
    • Approx LBS/MFT: 1005.00
    • Connector Type: Straight Jack
    • Contact Attach (Inner): Press Fit
    Order
    Add to List
  • EZ-1700-716MC
    EZ-1700-716MC
    EZ-1700-716MC
    $0.00 /
    • Approx LBS/MFT: 1055.00
    • Connector Type: Straight Plug
    • Contact Attach (Inner): Press Fit
    Order
    Add to List
  • EZ-1700-NFC
    EZ-1700-NFC
    EZ-1700-NFC
    $0.00 /
    • Approx LBS/MFT: 1087.00
    • Connector Type: Straight Jack
    • Contact Attach (Inner): Press Fit
    Order
    Add to List
  • EZ-1700-NMC
    EZ-1700-NMC
    EZ-1700-NMC
    $0.00 /
    • Approx LBS/MFT: 1058.00
    • Connector Type: Straight Plug
    • Contact Attach (Inner): Press Fit
    Order
    Add to List

LMR 1700 connectors are specifically designed for LMR-1700 cable in a range of interface types. Type N, 7-16 DIN and 7/8 EIA are all available options for LMR 1700 coax connectors. Both straight jack and straight plug connectors are offered. When transitioning to interfaces smaller than Type N, the use of a short jumper cable is highly recommended.

LMR 1700 Coax Cable Specifications

LMR 1700 Construction:

  • Inner Conductor: Bare Copper Tube (0.477" ID)
  • Dielectric: Foam PE (Polyethylene)
  • Outer Conductor: Aluminum Tape
  • Outer Braid: Tinned Copper

LMR 1700 Ratings:

  • Temperature:
    • Installation: -40°C to 85°C
    • Storage: -70°C to 85°C
    • Operating: -40°C to 85°C
  • RF Shielding: 50 dB greater than typical single shielded coax (40 dB) - multi-ply bonded foil outer conductor rated conservatively at 90 dB

LMR 1700 Applications:

  • Long antenna feeder runs
  • Building-top sites
  • LMR 1700 Cable may be used in any application (ex. WLL, GPS, LMR, WLAN, WISP, WiMax, SCADA, Mobile Antennas) requiring easily-routed, low-loss RF cable

LMR1700 Standard Connectors:

Construction of LMR 1700 Coax Connectors:

  • Description: Straight Jack or Straight Plug (see part specs for full details)
  • Inner Contact Attach: Press Fit
  • Outer Contact Attach: Clamp
  • See chart below and individual LMR 1700 Connector part specs for more info.