LMR-400-75

LMR 400-75 Cable

The LMR 400-75 cable is built for outdoor exposure and flexibility. It features a bare copper inner conductor and an aluminum tape outer conductor, which enables the tightest bend radius of any cable of similar size and performance. It also has a foam PE dielectric, a tinned copper braid, and a black PE jacket. This cable is also UV resistant. The LMR 400-75 uses standard LMR 400 connectors including type-N and type-F male plug with a 75-ohm interface. View LMR 400-75 Connectors here.

LMR-400-75 connectors from Times Microwave are for 75 ohm LMR-400-75 Cable. Interface types include BNC Male, F Male and N Male. Most LMR-400-75 coax connectors feature crimp outer and non-solder center contact attach. Choose from solder-on, solder or spring finger center pins.

2 items

  • LMR-400-75
    Times Microwave
    LMR-400-75
    LMR-400-75
    $0.00 / 1000 FT
    • Application: Indoor/Outdoor
    • Approx LBS/MFT: 68.00
    • Cond. Material: Bare Copper
    View Details
  • LMR-400-75-DB
    Times Microwave
    LMR-400-75-DB
    LMR-400-75-DB
    $0.00 / 1000 FT
    • Application: Outdoor
    • Approx LBS/MFT: 68.00
    • Cond. Material: Bare Copper
    View Details

LMR 400-75 Ohm Coax Cable Specifications

LMR 400-75 Construction:

  • Inner Conductor: Solid Bare Copper
  • Dielectric: Foam Polyethylene (FPE)
  • Outer Conductor: Aluminum Tape
  • Outer Braid: Tinned Copper
  • Jacket: Black Polyethylene (PE)

LMR 400-75 Ratings:

  • Temperature:
    • Installation: -40°C to 85°C
    • Storage: -70°C to 85°C
    • Operating: -40°C to 85°C
  • Voltage Rating: 2000 volts
  • RF Shielding: 50 dB greater than typical single shielded coax (40 dB) - multi-ply bonded foil outer conductor rated conservatively at 90 dB

LMR 400-75 Applications:

  • LMR 400-75 coax cable is suitable for use in video applications, such as CCTV, CATV, baseband, or broadband.
  • Satellite applications
  • In-building feeder runs
  • LMR 400-75 may be used in any 75-ohm wireless application requiring easily routed, low loss RF cable.

See the chart below and individual LMR 400-75 coaxial cable specifications for full details.

LMR-400-75 Loss Attenuation Specs by Frequency

Frequency (MHz) Attenuation (db per 100 feet)
30 0.6
50 0.8
150 1.5
220 1.8
450 2.6
900 3.7
1500 4.9
1800 5.4
2000 5.7
2500 6.4

Power Handling by Frequency

Frequency (MHz) Power (watts)
30 2.99
50 2.31
150 1.32
220 1.08
450 0.74
900 0.52
1500 0.39
1800 0.35
2000 0.33
2500 0.30

 

Construction of LMR-400-75 Coax Connectors:

  • Description: Straight plug connector type
  • Inner Contact Attach: Solder-on, Spring Finger or Solder (see part specs for full details)
  • Outer Contact Attach: Crimp
  • See chart below for individual Times Microwave LMR 400-75 connector specs TC 400-NM-75/50 is for installation on 75 ohm LMR cable and mates with 50 ohm type-N connectors.