LMR Lite 400 Cable
The LMR Lite 400 cable is a flexible, low-loss cable designed to be lightweight. It features a bare copper inner conductor and an aluminum tape outer conductor, which enables the tightest bend radius of any cable of similar size and performance. It also has a foam PE dielectric, a lightweight aluminum braid, and a black PE jacket. The LMR Lite 400 is suitable for both indoor and outdoor use and is UV resistant. LMR Lite 400 uses standard LMR 400 connectors. You can view LMR coax connectors here.
2 items
-
$0.00 / 1000 FT
- Application: Outdoor
- Approx LBS/MFT: 50.00
- Cond. Material: Bare Copper Clad Aluminum
-
$0.00 / 1000 FT
- Application: Outdoor
- Approx LBS/MFT: 50.00
- Cond. Material: Bare Copper Clad Aluminum
LMR Lite 400 Coax Cable Specifications
LMR Lite 400 Construction:
- Inner Conductor: Solid Bare Copper Clad Aluminum
- Dielectric: Foam Polyethylene (FPE)
- Outer Conductor: Aluminum Tape
- Outer Braid: Aluminum
- Jacket: Black Polyethylene (PE)
LMR Lite 400 Ratings:
- Temperature:
- Installation: -40°C to 85°C
- Storage: -70°C to 85°C
- Operating: -40°C to 85°C
- Voltage Rating: 2500 volts
- RF Shielding: 50 dB greater than typical single shielded coax (40 dB) - multi-ply bonded foil outer conductor rated conservatively at >90 dB
LMR Lite 400 Applications:
- LMR Lite 400 coax cable can be used as a drop-in replacement for RG8/9913 air-dielectric type cable.
- Jumper assemblies in wireless communications systems
- Short antenna feeder runs
- LMR Lite 400 low loss coax cable is recommended for use in any application requiring easily-routed, low-loss RF cable (ex. WLL, GPS, LMR, WLAN, WISP, WiMax, SCADA, Mobile Antennas).