.png)
- Application: Low Smoke Zero Halogen
- Approx LBS/MFT: 131.00
- Cond. Material: Bare Copper Clad Aluminum
- Conductor Stranding: solid
- CSA Type: FT4
- Dielectric (in): 0.455
- Dielectric Material: Polyethylene (PE) Foam
- Jacket Material: Low Smoke Zero Halogen (LSZH) Polyethylene (PE)
- Max. Temp: 85C
- Min. Temp: -40C
- No. of Strands: 1
- Nom. Cap. (pF/ft): 23.4
- Nom. Dia. of Cond.: 0.176
- Nom. Imp.: 50
- Nom. O.D. (in): 0.5900
- Shield: 2 Overall Shields
- Shield Material: Tinned Copper Braid/Aluminum Tape
- Vel. of Prop.: 87
LMR-600-LSZH LMR 600 Coaxial Cable
Our LMR-600-LSZH cable is part of our Wire & Cable line of Coaxial Cables. LMR-600-LSZH is made up of a solid bare copper clad aluminum conductor with a polyethylene (PE) foam dielectric, a low smoke zero halogen (LSZH) polyethylene (PE) jacket, and 2 overall shields of tinned copper braid/aluminum tape. Manufactured by Times Microwave and weighing approximately 131 lbs/MFT, these cables are rated for a voltage of 4000 volts and have a temperature range of -40° to 85°. Typically used in low smoke zero halogen applications, these cables are good for jumper assemblies in wireless communications systems, short antenna feeder runs, and any application in which easily-routed, low-loss RF cable is required.