TelcoFlex III Cable
The TelcoFlex III cable features a single stranded tinned copper conductor, low-smoke and zero-halogen TelcoHyde insulation, and an overall natural cotton braid covering. The braid is finished with a moisture resistant, flame retardant saturant. This cable is available in a range of sizes from 14 AWG to 750 KCMIL. This cable is rated at 600V and has a temperature rating of 60°C for wet conditions and 90°C for dry conditions.
13 items
-
TELCO-2/0-L3$0.00 /
- Approx LBS/MFT: 537.00
- AWG Size: 2/0
- Cond. Material: Tinned Copper
-
TELCO-4/0-L3$0.00 / 1000 FT
- Approx LBS/MFT: 808.00
- AWG Size: 4/0
- Cond. Material: Tinned Copper
-
TELCO-350-L3$0.00 / 1000 FT
- Approx LBS/MFT: 1290.00
- AWG Size: 350
- Cond. Material: Tinned Copper
-
TELCO-500-L3$0.00 / 1000 FT
- Approx LBS/MFT: 1796.00
- AWG Size: 500
- Cond. Material: Tinned Copper
-
TELCO-750-L3$0.00 / 1000 FT
- Approx LBS/MFT: 2629.00
- AWG Size: 750
- Cond. Material: Tinned Copper
TelcoFlex III Power Cable Specifications
TelcoFlex III Construction:
- Conductor: Stranded tinned copper conductor
- Insulation: Limited smoke, non-halogen TelcoHyde 5221, which features a limiting oxygen rating of 35%
- Separator: 1 mil clear mylar tape is applied over the insulation for sixes 6 AWG and larger
- Covering: Overall natural cotton braid. A section of completed cable has a limiting oxygen index of 35%.
- Finish: Moisture resistant and flame retardant saturant and color finisher are applied to the braid.
TelcoFlex III Ratings and Approvals:
- Temperature Rating: 90°C Dry and 60°C Wet
- Voltage Rating: 600V
- ASTM B-33
- UL: RHH/LS, Listed for CT Use (Sizes 1/0 AWG and Larger)
- CSA: AWM / B 105°C
- FT4-ST1 Flame Test
- VW-1
- IEC 60674 and 60332
- RoHS and Reach Compliant
TelcoFlex is a TM of Southwire Company