Belden's TC Cable / CIC Cable is available in 600V and 1000V varieties. These Belden cables feature stranded bare copper conductors, XLPE insulation, and PVC jacketing. They have approval for direct burial applications and are suitable for use in hazardous locations, according to CEC Part 1.
The Belden 600V multi-conductor ACIC Cable is built with a stranded bare copper conductor, XLPE insulation, a PVC inner and outer jacket, a bare copper ground wire, and interlocked aluminum armor. This ACIC cable offers impact, crush, moisture, heat, and corrosion resistance. It is a low dielectric loss cable with high dielectric and tensile strength. With all of these physical and electrical benefits, ACIC cable is a good choice to consider for applications requiring the additional strength and protection of armored cable.
Belden's Teck 90 Cable is also available in 600V and 1000V constructions. Teck 90 Cable is suitable for use in direct burial applications and as exposed or concealed wiring. It is also suitable for use on walls or beams, in ventilated, non-ventilated, or ladder-type cable trays, and in wet or dry environments. Because Belden Teck 90 and ACIC Cables are strong and impact and crush resistance, they do not require conduit or ducts. The bottom line? Without conduits or ducts, you save on the material cost!
Allied Wire and Cable also carries Belden VFD Cable. This variable frequency drive cable is CSA rated and passes the CSA FT4 flame test. Belden’s 14 to 2 AWG VFD Cables feature oversized XLPE insulation and dual shielding to provide superior performance. It offers the lowest capacitance offered in VFD cables and protection against low and high-frequency noise. Larger options from 1 to 4/0 AWG feature spiral copper tapes for protection against EMI/RFI interference while maintaining flexibility. These large Belden VFD cables also feature a balanced ground system to help prevent motor bearing or motor insulation failure.
For full product specifications, click on the ACIC Cable, TC Cable, CIC Cable, and VFD Cable links above. If you have any questions or would like to order Belden Cable, call an Allied representative at 800-472-4655.